Contact Person
Vishwanath Bhadranavar
( Proprietor )

Product Information

Machining on Wire Cut EDM

Machining on Wire Cut EDM

Meenaxi Engineering are offering Machining on Wire cut(EDM) in Pune. Wirecut EDM (Electrical Discharge Machining) is a thermal machining process.
Detailed Description

 

Meenaxi Engineering are offering Machining on Wire cut(EDM)   in Pune. Wirecut EDM (Electrical Discharge Machining) is a thermal machining process. Sparks discharged from a small-diameter, tensioned wire erode the workpiece without any contact between the tool and the part produced. This process produces a straight, narrow-kerf cut. The slowly moving wire brings a fresh, constant diameter electrode to the cutting gap, thereby enhancing kerf size control. The dielectric is deionized water under pressure, introduced through concentric nozzles at the top and bottom of the workpiece. As the wire discharges sparks for thermal machining, the table on which the workpiece is mounted moves to generate X and Y coordinates. Here, small pulse increments (in the order of 1 micron) assure accurate cutting. Wirecut EDM can be up to a five-axis process.

close
Send Your Message
 
Error message
change-chapcha

Enter code: